Looking for new tires with optimal traction? Or are long-lasting treads a 
                    bigger priority? There’s a simple way to compare tire specs!
                
            
            
                The Uniform Tire Quality Grading (UTQG) system was developed by the Department 
                of Transportation (DOT) to assist consumers in the purchase of their tires by 
                providing a standard grading system used by all tire manufacturers. Tire 
                manufacturers use the UTQG system to grade their tires in three important 
                areas: treadwear, traction and temperature. The UTQG grade for each tire 
                is shown on the paper label affixed to the tire and is also molded in the sidewall.
            
            
                Treadwear Grade – A comparative grade based on the actual wear of the tire’s 
                tread when tested under specific controlled conditions. All tires are tested under 
                the same conditions to allow for comparison between manufacturers and between 
                different lines of tires from the same manufacturer. The system is fairly easy 
                to understand. A tire with a treadwear grade of 400 should have a useful tread 
                life approximately twice as long as a tire with a treadwear grade of 200. The 
                higher the grade, the better the expected treadwear.
            
            
                Traction Grade – A comparative grade based on the tire’s ability to stop 
                on wet pavement, again as measured under controlled conditions on wet asphalt 
                and concrete surfaces. The grades, from highest to lowest, are designated 
                AA – A – B – C. A tire that is graded AA should 
                have better traction or stopping performance than a tire with a lower grade, 
                based on the specific straight-ahead braking tests.
            
            
                Temperature Grade – A comparative grade based on the tire’s resistance 
                to heat and its ability to dissipate heat, again as measured under controlled 
                conditions. The grades, from highest to lowest, are designated A 
                – B – C. An A-rated tire is the coolest running, while a C-rating 
                meets the minimum federal performance standards. These temperature grades are 
                set based on a tire that is properly inflated and not overloaded.
            
            
                UTQG is a great way to compare tires from various manufacturers and between specific 
                lines from the same manufacturer. Remember: The UTQG isn’t a safety rating and it 
                doesn’t guarantee a tire’s mileage performance - but you can use the UTQG in 
                conjunction with price, warranty, appearance and recommendations to make the 
                right tire choice for your needs. If you have any questions about UTQG or various 
                tire lines, the Big O Tires team is always ready to help!